top of page
nzz-logo-white.png
II-08-M8-1,75
IMG_1481.JPG

Nozzle used for glass fiber filled filament with a section of 1,75mm. The nozzle has a print channel of 0,4mm. Nozzle has a screw part with a M6.

The nozzle is made of a Tungsten Carbide alloy. Though anough for carbon fiber filled material. Tests showed that this is a very good print nozzle with layers of 0,15mm up to 0,35mm. 

A great quantity of material can be printed before the nozzle shows issues on the printed parts.

 

On the page TIPS & TRICKS you can find some advise that can be usefull  to make your own settings in your slicer.

This nozzle is also applicable for the Mono-materials, ceramic charged and metal charged filaments. 

Still been tested

bottom of page